Trada

We are shipping company to support Oil, Energy & Mining Industry.
Due to rapid growth, currently we are seeking a qualified candidate to join our team as:
Port Engineer (PE)
Requirements:

• At least 3 (three) years working experience as Port Engineer/Surveyor
• Strong knowledge in vessel’s machinery
• Good English & Computer literate

Procurement & Logistic Supervisor (PL Spv)
Requirements:

• Min. S1 with 3 (three) years experience in machinery purchasing especially for marine & tanker equipment
• Having good relation with domestic and overseas vendors
• Understand the procedure of materials import
• Good English & Computer literate

Maintenance & Repair Supervisor (MR Spv)
Requirements:

• Preferably from Institute of Marine Merchant with license ATT I/ATT II or S1 Engineering
• Min. 3 (three) years experience as Chief Engineer/Surveyor
• Posses good knowledge about ISPS code is preferable
• Good English & Computer literate

Mooring Master (Moor)
Requirements:

• Institute of Merchant Marine, with license ANT II – ANT I
• Must hold Maritime Pilot Certificate from DGSC (HUBLA)
• Min. 5 (five) years as Mooring Master or ocean going Ship Master preferably from Oil Company
• Good English & Computer literate

Please send your resume and supporting document (please mark the job code), to:

HR Recruitment
PO BOX 6167 / JKSGN JAKARTA 12061 or
email to: recruitment@trada.co.id

HESS

HESS - We are looking for qualified personnel with high motivation, initiative and integrity to fill in the following permanent staff positions:

1. PLANT OPERATOR
2. SENIOR OPERATOR
3. SUPERINTENDENT - Production, Maintenance, EHS.

Qualification:

• Diploma Degree in Petroleum, Chemical. Mechanical, Electrical Engineering. (D3)
• Experience in Oil & Gas/ Petrochemical Plant, for Plant Operator min. 3 (three) years and for Senior Operator min. 6 (six) years. Superintendents min. 10 (ten) years.
• Experience with permit to work system, safety, process, mechanical and electrical equipment, operations and maintenance.
• Proficiency in English both speaking and writing
• Proficiency in MS Office applications (Excel, Word, PowerPoint, Access)
• In good state of health.
• Based at Gas Plant on a swing shift rotation in South Sumatra.

Email your application and CV not later than 1 (one) week after the publication of this advertisement to:

lamaran@jambimerang.co.id

State your selected position in the subject of your application. Only qualified candidates will be contacted for further selection process.

Technip

TECHNIP is a leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries; with its 22,000 people worldwide and annual revenues of almost 7 billion euros. TECHNIP has been ranked by American Engineering Weekly in its 2007 list of "Top 225 International Contractors" as 1st for the World Industrial / Petroleum Market.
In Asia-Pacific, Technip has been present for more than 20 years. As part of its expansion in Asia-Pacific, Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below:

SENIOR PROCESS ENGINEER
Job Requirements:

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 10 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Lead Process Engineer.
• Minimum of 7 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Senior Process Engineer.
• Shall have good written and spoken English language communication skills.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Engineering softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.

PROCESS ENGINEER
Job Requirements:

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 3 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support.
• Shall have good written and spoken English language communication skills.
• Should possess hands on experience in handling Process Engineering softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of drafters
• Should be able to co-ordinate within the discipline and other disciplines.
• Should be a fast learner and a team worker.

SENIOR PROCESS SAFETY ENGINEER
Job Requirements:

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 10 years experience in Offshore / Onshore Oil and Gas, Refining, Petrochemical Engineering / Operation / Design and Commissioning Support for Lead Process Safety Engineer.
• Minimum of 7 years experience in Offshore / Onshore Oil and Gas, Refining, Petrochemical Engineering / Operation / Design and Commissioning Support for Senior Process Safety Engineer.
• Shall have good written and spoken English language communication skills.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Safety Engineering softwares like PIPENET, FLARESIM etc.
• Should be able to perform fire water hydraulic calculations and develop process safety drawings like hazardous area classification with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Safety Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.
• Should be able to interact with 3rd party specialist for safety studies.

PROCESS SAFETY ENGINEER
Job Requirements:

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 3 years experience in Offshore / Onshore Oil and Gas Engineering / Operation, Design and Commissioning Support.
• Shall have good written and spoken English language communication skills.
• Should possess hands on experience in handling Process Engineering softwares like PIPENET, FLARESIM etc.
• Should be able to perform fire water hydraulic calculations and develop process safety drawings like hazardous area classification with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Safety Engineering (NFPA, SOLAS, API, IP etc) in Oil and Gas industry
• Should have enough supervisory skill to manage a team of drafters
• Should be able to co-ordinate within the discipline and other disciplines.
• Should be a fast learner and a team worker.

PROCESS/ SAFETY DRAFTSMAN (CAD)
Job Requirements:

• Must possess minimum Diploma / Certificate in Engineering drafting from a recognized institution / Technical school in Indonesia.
• Minimum of 3 years experience in Offshore / Onshore Oil and Gas projects related drafting.
• Should be able to generate process drawings like P&IDs and safety drawings like safety equipment layout etc with good accuracy and speed.
• Should have sufficient knowledge about the drafting standards and AutoCAD library.
• Shall have good written and spoken English language communication skills.
• Should possess hands on experience in handling drafting softwares like AutoCAD, Microstation etc.
• Should be a fast learner and a team worker.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the Job Position on the subject email.

ConocoPhillips

ConocoPhillips is an international, integrated energy company headquartered in Houston, Texas, and operating in more than 40 countries.
As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following positions:

HR Generalist
Basic Purpose:
Acting as an HR Single Point of Contact (SPOC) to Client Management in the whole process of HR functions: Manpower Planning, Recruitment, Training and Development, Employee Relations, and Compensation & Benefit.

Qualification & Experience:

• Must have minimum S1 Degree or equivalent.
• Minimum having 3 - 5 years of experience in HR related matters from multinational company.
• Have an excellent communication both oral and written English, and presentation skills.
• Knowledge of Government, Company and Corporate regulations and policies related to HR is an advantage.
• Have excellent teamwork, analytical, problem solving and interpersonal skills.

Write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV to:

RSCJakartaRecruitment@conocophillips.com

This posting will be closed on 22 February 2008. Only very short-listed candidates will be contacted for further process.

Jobs Vacancy : BHP Billiton

BHP Billiton is the world's largest diversified resources company with some 39,000 employees working in more than 100 operations in 25 countries.

Mining Engineers
BHP Billiton is currently pursuing an exploration program involving a significant nickel laterite deposit in Eastern Indonesia. This potential resource opportunity is in the early stages of study development, however our aim is to build world-class mining facilities, a process plant and associated infrastructure.

If you have an overriding commitment to safety, health, the environment and community we invite you to join our dynamic, high performance study team, being established in Jakarta, for the various development stages.

POSITION SYNOPSIS
Reporting to the Process Manager, you will be responsible for the identification of alternatives for the mine design in this dynamic Nickel laterite development. In conjunction with this, you will be accountable for progressing the engineering study through basic and detailed engineering, as required by the study phase, in order to generate an optimised mine plan and extraction sequence. The execution of the mine strategy will comply with local and statutory laws and regulations, whilst ensuring optimum return for both the community and company. You will also be involved in contributing to the Ore Reserve Statement and Project Execution definition.

SKILLS AND EXPERIENCE
Your solid background in large scale development projects and exposure to Nickel will be supported by a degree qualification in Mining or Civil Engineering. You will have had previous experience working in a senior mining engineer role incorporating the accountabilities listed above. An innovative and strategy-focussed self starter, who thrives on goal achievement, you are driven to achieving the highest Health, Safety, Environmental and Community standards, and Zero Harm practices. Your communication skills in English and Bahasa Indonesian will allow you to deal with a wide range of key stakeholders to help ensure the success of the project.


This is a Jakarta-based position with frequent travel.

Applicants must hold Indonesian Nationality with the authority to work in Indonesia.

Previous applicants to this role need not apply.

HOW TO APPLY
Please visit http://jobs.bhpbilliton.com to apply before Friday 22 February, 2008. To locate, enter Reference Number 374051.

Employment Opprtunities at ConocoPhillips

ConocoPhillips is an international, integrated energy company headquartered in Houston, Texas, and operating in more than 40 countries.

As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following positions.

RELIABILITY ENGINEER
Qualifications and Experience:
Minimum Requirement Technical Degree S1 in Mechanical or Electrical or Instrument or D3 with at least 10 years experience in a maintenance or engineering role, Preventive and Predictive maintenance, Mechanical Integrity, Process Safety Management, SAP Systems and a background in oil & gas industry will be an advantage Good spoken and written English is essential.

MAINTENANCE ADVISOR
Qualifications and Experience:
Minimum requirement Technical Degree S1 in applicable Engineering discipline or D3 with at least 10 years experience in Mechanical equipment Maintenance and Operations, logistics and planning preferably in the offshore Oil and Gas industry; knowledge of Reliability Integrity processes and tools i.e. RCM, Defect Elimination, RCFA, and Pareto, Condition Monitoring Techniques, Gas Turbines (RR Avons, RB211‘s, Solars) centrifugal gas compressors, pumps & motors and SAP systems would be an advantage. Good spoken and written English is essential.

MECHANICAL TECHNICIANS
Qualifications and Experience:
Min. Diploma 3 in Mechanical Engineering, experience in Mechanical Rotating Equipment maintenance, Gas Turbines, Compressors and Pumps, Conditioning Monitoring Programs and Turbo Machinery, knowledge in HVAC systems will be an advantage.

SYSTEM/INSTRUMENT TECHNICIANS
Qualifications and Experience:
Min. Diploma 3 in Electronic Engineering or Instrumentation Engineering, experience in Control Systems, PLC, DCS, Fire & Gas detection and calibrating test equipment.

PRODUCTION OPERATORS
Qualifications and Experience:
Min. Diploma 3 in Engineering Disciplines, experience in petrochemical or oil & gas industry, background in well operations will be an advantage.

HEATING VENTILATION AND AIR CONDITIONING TECHNICIANS (HVAC)
Qualifications and Experience:
Min. Diploma 3 in the Refrigeration & Air Conditioning or Mechanical or Electrical Engineering with at least 5 years experience in the maintenance, operations and installation of the HVAC Systems.

Only those individuals who fully meet the above requirements need apply. Write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV not later than 24 February 2008 for

RSCIndonesiaRecruitment@conocophillips.com

Jobs Vacancy : QatarGas

Qatargas Operating Company has exciting opportunities available for qualified professionals to join our company in the development of the vast North Field in Qatar. Qatargas currently has under development over $20 billion worth of major projects, including the construction of four new Liquefied Natural Gas trains for the production and export of LNG to every corner of the globe.

Manager Plant Engineering Support
Reporting to the Engineering Manager and supervising 52 specialists, you will be responsible for the technical support to the existing and new facilities, covering process, facilities, discipline, instrument & electrical engineering activities. The successful candidate will have a degree in Engineering and 10-12 years experience in operating plant facilities, solving process and equipment problems and project process development experience in the gas processing and LNG industry. Experience with troubleshooting, process simulation, P&ID development, conceptual and detailed design, including exposure to other than process engineering disciplines are essential. Must be conversant with use of process simulation and design packages and in the development of equipment process specifications. Must have a minimum of 4 years of management experience at Section Head level and excellent written and spoken English.

Lead Discipline Engineer
To provide technical support to plant operations & maintenance as well as for internal project development in their respective engineering disciplines. Candidate should have knowledge of other discipline engineering areas, enabling to lead the team and steer the activities. Candidate should hold a BSc in Mechanical Engineering, capable of leading a team of various discipline engineers, covering Mechanical, Piping, Rotating Equipment, Civil and Structural Engineering. The successful candidate should have a minimum of 12 years experience in Oil & Gas engineering field and managerial/supervisory experience.

Rotating Equipment Engineer – OPCO
To analyzes existing or proposed rotating equipment and turbo-machinery including systems for onshore plant and offshore production facilities and review engineering design work connected with minor or major projects, for modifications to the existing facilities or installation of new rotating equipment. To study and analyze complex or recurring problems relating to rotating equipment recommending appropriate solutions. Responsible for shop and field test, start-up or overhaul procedures, QA/QC on rotating equipment, troubleshooting, reliability improvement review, maintains and updates equipment drawings, standards, procedures and specifications. The successful candidate should have University degree in Mechanical Engineering, 10 year’s experience in design and maintenance of rotating equipment with at least 5 year’s in the petroleum/ gas processing plant. Must have experience with one or more of Frame 5, 7, 9 turbines and their use live compressor drivers. Cryogenic pumping experience would be an advantage, preferably in LNG. While design office experience is beneficial, a plant operating background is essential. Good written and spoken English.

Loss Prevention Engineer
Responsible for technical HSE support for corporate LNG projects. The successful candidate should have a degree in a technical subject, preferably Chemical or Safety Engineering, an Oil and Gas operational background and at least 5 years experience of Hazops (Hazard and Operability studies), Hazids (Hazard Identification studies), QRA’s (Quantified Risk Assessments), SIL (Safety Integrity Level) assessments review, fault trees, failure modes effects analysis. Good written and oral communication skills in English are essential.

Facilities Engineer
To analyze process, utilities, storage and other support systems for the off-shore production facilities and onshore plant. To prepare or review design work connected with multi-disciplinary projects, modifications and alternations to existing or new systems. To investigate plant technical issues and provide expert technical advice to management and other departments/divisions, particularly on the subjects of piping, valves, actuators, fittings, heaters, coolers, exchangers, filters, flares, vessels, nozzles and tanks. To work with other specialist discipline engineers in the maintenance and updating of engineering drawings, standards, specifications, manual, and data books. Candidate should have an Engineering degree and a broad knowledge of various engineering areas. The successful candidate should have a minimum of 8 years experience including 4 years of multi disciplinary project experience.

Piping Engineer
To provide technical advice to management and other departments/divisions on the subjects of piping, valves, actuators, and static equipment including pressure vessels, heat exchangers and storage tanks. Responsible for the technical integrity of all piping systems including cryogenic systems, particularly relating to pipe stress analysis, pipe supports and piping system over pressure protection (surge analysis) and overall safety of systems. The successful candidate should have a degree in an Engineering discipline, preferably Mechanical Engineering and minimum 10 years experience in troubleshooting, production and processing equipment in the Oil and Gas industry and in a multi-discipline project environment. Good written and spoken English is required.

Process Engineer
To perform engineering duties designed to support gas processing activities, including optimization of facilities according to long term plans and shipping contracts. Responsible for daily performance summaries and for initiating process studies for major and minor field modifications for the existing facilities in the plant, liaising with Plant Maintenance and Technical personnel. To monitor equipment performance and to prepare cost estimates for future investments. The successful candidate will have a degree in Chemical Engineering or equivalent and minimum 8 years in process engineering or process supervisory experience in the Oil and Gas industry, ideally in LNG production. Good written and spoken English is essential.

Qatargas offers a secure expatriate lifestyle in an international Community with educational, medical and recreational facilities, competitive tax-free salaries, a full range of benefits, including family or bachelor housing, furnishings and generous paid annual vacation back to your country of origin.

Those interested in being considered for these exciting opportunities, please send a comprehensive C.V quoting the appropriate position title not later than 24 February 2008 to:

PT GUNAMANDIRI PARIPURNA
Jl. Kapten Tendean No. 24
Mampang Prapatan
Jakarta Selatan 12720
INDONESIA
Tel. 062-21-7191060 (Hunting)
Fax 062-21-7191017
Email : qatargas-engineer@gunamandiri.com
Website : www.gunamandiri.com

For more information about Qatargas, the expatriate community, benefits and Qatar in general, visit www.qatargas.com

OGS Resources Private Limited

OGS Resources Private Limited is a Singapore-based Global Staffing Company specializing in Recruitment, Headhunting, Contract Manpower and Consulting Services for the Oil and Gas Industry. Its Management and Human Resources team have been actively engaged for decades in the oil and gas industry. The Company has the strong technical recruitment and HR management experience and the consolidated financial position that enable it to be a fully reliable partner for both Major Clients and the industry’s top Petroleum professionals.

Several of the Company’s Major Clients in the Middle East are urgently seeking competent and dedicated specialized professionals, experienced in Oil and Gas industry, in the following positions:

• LNG Instructors (Process, Instrument, Electrical, Safety)
• Civil Construction Engineers
• Design Engineers
• HSE Engineers
• Electrical Engineers
• Instrument Engineers
• Mechanical Engineer
• Process Engineers
• Production/Operations Engineer
• Project Engineers
• HR Specialists (Manpower Planning)
• HR Specialists (Succession Planning)
• Procurement Specialists
• Logistics Superintendent/Coordinator
• Technical Buyers
• Construction Supervisor
• Commissioning/Start-Up Supervisors
• Pipeline QC Supervisors
• Well Operations Supervisors
• QA/QC Inspectors
• Construction Foreman/Team Leaders
• Safety Officers
• Crane Operators
• Drilling Operations
• Panel Operators
• Pipe Fitters
• Sr. Technicians (Mechanical, Electrical, Instrument, Structural)
• Utilities Operators
• Welders
• Machinists

Send your complete resume under MS Word Format by email to: apply@ogsresources.com

Quote the Position Title you are applying for in the “Subject” line. Applicants need only send their CV once.

Jobs Vacancy at PT Humpuss

PT. HUMPUSS established in 1984, act as Holding Company and doing business in trading oil & refined oil product, mining product, petrochemical product, seeking for qualified candidate to join our team, as:

Mining Specialist
Requirement:

• Male, age max. 28 years old
• Fresh Graduate from Geologist or Mining Engineering
• Willing to travel
• Computer Literate
• Good communication and English language skill
• High motivation, integrity, good interpersonal/communication skill, high curiosity investigative, good team player

Send your resume to:
taufik@humpuss.co.id

Job Vacancy : Petrosea

Petrosea - We currently have an exciting opportunity for National Staff position within Petrosea Offshore Supply Base (POSB) for a Operation Superintendent. This role will manage the tactical and operational aspects of the integrated offshore supply and logistic operation in Petrosea Offshore Supply Base ( POSB ) Tanjung Batu - Balikpapan, East Kalimantan. This is a residential position initially based in Balikpapan.

Operation Superintendent (OS)
Key Responsibilities:

• Managing and prioritizing freight with a strong focus on value chain improvement auditing of supply chain activities, chain of responsibility and other contract compliance requirements
• Reviewing and taking action to ensure that appropriate supply chain resources, facilities and equipment capabilities are in place in the Petrosea Offshore Supply Base ( POSB ) to meet future project expansion.

Key Competencies:

• Five years of relevant industry, experience in staff position working within the material handling sector heavy lifting in Oil & Gas industry
• Be committed to safety – Safe Operating Practices
• Posses a good management skills
• Excellent written and verbal communication skills in English
• A Degree qualification in a Mechanical Engineering or similar related discipline would be well regarded
• Strong leadership, interpersonal and team skills with the ability to work autonomously embrace Petroseas values of integrity, partnership, trust, and incident and injury free operations.

If you meet the above mentioned qualification, please send your application letter completed with detail resume, recent photograph, and work reference to the address below not later than 2 March 2008, or email to : hr.bpn@petrosea.com

Put the position code on the subject letter. All applications will be treated strictly confidential and only short-listed candidates will be notified for interview.

HRD PT. PETROSEA, Tbk
PO Box 115
Balikpapan, East Kalimantan

EMPLOYMENT OPPORTUNITIES AT CONOCOPHILLIPS

ConocoPhillips is an international, integrated energy company headquartered in Houston, Texas, and operating in more than 40 countries.

As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following positions.

SR. DRILLING ENGINEER (8 - 12 years experience) - Code: SDE
DRILLING ENGINEER (4 - 8 years experience) - Code: DE

Basic Duties:
This individual will assume a key technical role in assisting and developing implementation strategies and procedures for various field development and exploration drilling operations. High degree of knowledge in directional drilling, drilling fluids, cementing, hydraulics, bit applications, torque and drag modeling, casing design, and material selection. Exposure to wells designed for offshore and onshore environment. Should have adequate onsite experience during well operations. Be familiar with tendering and contracting requirements used in Indonesia. Must possess good analytical, decision making, and organizational skills. A portion of the duties is to provide mentoring, quality control and quality assurance of work, by less experienced engineers.
A Senior Drilling Engineer is a highly competent professional and will be asked to participate on special task forces/teams supporting senior management.

Primary Functions and Responsibilities:

• Organize and implement project schedules
• Assist in developing rig and drilling service specifications and preparing tenders
• Prepare drilling and workover cost estimates for AFE’s
• Drilling program planning and preparation, including casing and cementing design, directional planning, drilling assembly, drilling procedures, etc. for various field developments.
• Negotiate and administer contracts with outside suppliers of equipment and services.
• Control drilling expenditures within approved limits.
• Review drilling operations and engineering performance and make recommendations to management on the use of new equipment or techniques to improve operational cost effectiveness.
• Ensure that the well plans are being followed and operations manuals are being executed to ensure safety and environmental protection programs are being followed.

Qualification & Experience:

• Minimum BS degree in Petroleum, Chemical or Mechanical Engineering.
• Technically competent in drilling engineering.
• Previous experience in completions, production, reservoir or facility engineering is preferred, as well as field operational support. Previous experience in project developments.
• Must be self-directed and capable of managing multiple tasks.
• Good interpersonal & time management skills, with an expectation to mentor junior engineers.
• Must be able to solve problems with minimal to no supervision and to have the wherewithal to know when to obtain expert help.
• Have some limited knowledge of subsurface functions (geology and reservoir engineering).
• Possess basic business knowledge and a good understanding of petroleum economics.
• Should be proficient in English (written & oral)

Only those individuals who fully meet the above requirements need apply. Please indicate the position name you apply in the subject of your email. Send your application and CV not later than 15 February 2008 to :

RSCIndonesiaRecruitment@conocophillips.com

Jobs Vacancy : Halliburton

HALLIBURTON - As a Global Company in the Oil and Gas Service Industry, Halliburton delivers Expertise, Service, Speed and New Technology leading the world in Integrated Energy Services, Engineering, Construction and Maintenance.

To support our operations in Indonesia, we are seeking highly qualified candidates for the following positions:

CUSTOMER FINANCIAL SERVICES MANAGER (Code: CFS Mgr)
Reporting to Regional Credit Manager, the candidate will acquire principal Duties & Responsibilities that include collect cash from assigned customer A/R portfolio, identifies, assigns resolver, reports, and tracks customer service complaints, collection/Management of accounts receivable, acquires and analyzes customer financial information, assessing risk in establishing new accounts, promotes innovative approaches to financing, bringing additional opportunities to Halliburton, organize and maintain customer information and collection support to support Sarbanes Oxley, develop core working relationships with customers, other CFS personnel, F&A, BD, PSL and industry peers, establishes/develops long term relationships with customers which fosters collectability and increases market share, provide bad debt reserve and write off recommendations, administers an effective program to follow up on previously charged off accounts, assist in supervision and training of Customer Financial Services Representatives as assigned, recommend and initiate legal actions and interface with attorneys as required to maintain necessary level of attention, provide bad debt reserve and write off recommendations, administrates an effective program to follow up on previously charged off accounts.

Requirements:

• Candidate must possess at least a Bachelor’s Degree, Post Graduate Diploma, Professional Degree or Master’s Degree in Economics, Finance/Accountancy/Banking, Commerce or equivalent or with Professional qualification (ACCA, ICSA or CIMA).
• At least 5 to 7 years of relevant experience in commercial credit and collection working in Multinational Company (MNC) or financial/banking institution, of which at least 3 years in a managerial position with supervisory experiences.
• Technical competencies include good negotiation skills and the ability to operate the technological tools as it relates to areas of accountability, including Microsoft software and on-line collection software, credit risk management skills including company financials analysis and overall ability to balance risk factors for a comprehensive evaluation, ability to make independent credit decisions.
• Familiar with Sarbanes Oxley and the basis requirements to support the same.
• Preferably senior executives or managers specializing in Commercial Credit and Collection / Banking / Financial Services or equivalent.
• Excellent interpersonal skills include ability to create and cultivate relationships, handle pressure & conflict and effectively communicate & work with both customers and internal sources.
• Ability to work in a team environment.

Please send your applications detailing experiences, qualifications, related training, reference, contact details and recent photograph to:

PT. Halliburton Indonesia
PO Box 7575/ JKSCCE
12560 Jakarta – Indonesia
or e-mail to recruitment.Indonesia@halliburton.com

Please put the position applied for at the top left of the envelope and on the subject if you send by e-mail not later than 8 February 2008. Only short-listed candidates will be contacted.

PT Elnusa Divisi Drilling Services

PT Elnusa Divisi Drilling Services (EDS) is a subsidiary company of Pertamina, the State Oil Company of Indonesia.
EDS is an integration of highly experienced and recognized oilfield services business units from sister companies within PT Elnusa.
The main goal of this integration is an Integrated Drilling Services which delivers seamless and outstanding 'One Stop' Solutions for our customers.
With highly dedicated and experienced personnel in the area of Drilling Rigs, Drilling Fluids, Mud Logging, H2S Monitoring, Wireline Logging, Log Processing, Cementing, Stimulation and Testing, we commit ourselves to perform with the highest Service Quality.


Electrical Supervisor (ES)
Qualifications:

1. D3 Electrical
2. Has 10 years experience in the same position at Oil & Gas Company
3. Good communication in English (Oral & Written)
4. Willing to work on site area

Mechanical Supervisor (MS)
Qualifications:

1. D3 Mechanical
2. Has 10 years experience in the same position at Oil & Gas Company
3. Good communication in English (Oral & Written)
4. Willing to work on site area

Rig Superintendent (RS)
Qualifications:

1. Minimum D3 any background education
2. Has 10 years experience in Drill and 5 years as Rig Superintendent at Oil & Gas Company
3. Good communication in English (Oral & Written)
4. Willing to work on site area
5. Has certification of Drill & AP3

Driller (DL)
Qualifications:

1. D3 Geology / Mine Engineering
2. Has 3 years experience in Oil & Gas Company
3. Has certification of Drill & AP3
4. Has experience to make Drill
5. Good communication in English (Oral & Written)
6. Willing to work on site area

Tour & Tool Pusher (TP)
Qualifications:

1. Minimum D3 any background education
2. Has 10 years experience in the same position (Tour Pusher) at Oil & Gas Company
3. Good communication in English (Oral & Written)
4. Willing to work on site area
5. Has certification of Drill, AP3 & Sea Survival

Please forward your resume, cover letter and copy of your transcript via email to: fay@elnusadrilling.com

Mining Career at PT Kaltim Prima Coal

PT Kaltim Prima Coal (KPC) operates a coal mine in Sangatta East Kalimantan and is one of the largest export coal mines in the world. Coal production in 2007 was over 36 million tones and there plans for further expansion in 2008 and beyond.

In material movement terms, KPC is also one of the largest open pit mines in the world with a fleet of over 200 haul trucks and 30 shovels moving over 2 millions tones of material per day

Opportunities exist for a seasoned, high caliber, professional to join the Company with job assignment in Sangatta - East Kalimantan for the positions of:

1. Superintendent Mine Geology (Code:SMG)
2. Superintendent HSE (Code:SHSE)
3. Senior Geotechnical Engineer (Code:SGE)
4. Senior Mining Engineer (Code:SME)
5. Mining Engineer (Code:ME)
6. Geotechnical Engineer (Code:GE)
7. Dispatch Engineer (Code:DE)
8. Shift Coordinator Quality Control (Code:SCQC)
9. Specialist Maintenance Training - Mechanical (Code:SMTM)
10. Specialist Maintenance Training - Electrical (Code:SMTE)

Send your application resume to:
PT Kaltim Prima Coal, PO BOX 620 Balikpapan 76106, Kalimantan Timur
or
E-mail:recruitment@kpc.co.id
For detail information, please visit our website: www.kaltimprimacoal.co.id

Mining Career at PT Lintech Duta Pratama

PT Lintech Duta Pratama - Our company is provide design, fabrication, inspection and testing of structural steel plate works and manufacture of rubber products. For more info about our company, please visit : www.lintech.co.id
Now, we are looking for candidates to fulfil following vacancies :

Safety Officer Superintendent (K3 Certificate)
Job Description:

• The candidates must be able to provide technical training / directing operations staff to always implements the safety standards and procedures
• The candidates must have knowledge of applicable industry practices and regulations

Requirements:

• Male / Female, age max. 35 years old
• D3/S1 degree in related major
• Has AK3 Certificate
• Minimum 2 years experience in specialization of Fabrication Construction
• Having knowledge of Regulation Occupational Health and Safety and Management System
• Having knowledge of ISO 14000, OHSASS and SMK3 requirements
• Computer Literate
• Fluent in English both oral and written
• Have an excellent interpersonal and communication skills.
• Willing and able to work under pressure to meet deadlines
• Wiling to work in Surabaya

Quality Control/Quality Assurance Manager (QA/QC Manager)
Requirements:

• S1 degree majoring in Metallurgy - Mesin - Perkapalan, preferable from ITS
• Preferable having Welding Inspector certificate
• Familiar with Ultrasonic Equipment
• Minimum 3 years experience in steel fabrication.
• Have experience in ISO 9001:2000 QC Systems
• Fluency in both Written & Spoken English
• Computer literate.
• Good analytical thinking and strong leadership skills.
• Able to work hard, under-pressure, independence & in teamwork as well, self starter, posses good interpersonal.
• Willing to be based in Surabaya or throughout Indonesia & Australia

Drafter
Requirements:

• Min. Bachelor Degree in Architecture - Mechanical - Electronic Engineering
• Minimum 2 year experience in similar position. Have working knowledge and experience with Auto CAD, Corel draw, Freehand and Photoshop
• Computer literate
• Fluent in English both oral and written
• Creative & Innovative
• Willing and able to work under pressure
• Wiling to work in Surabaya

Sales Engineer
Requirements:

• Male/Female
• Diploma / Bachelor Degree in Engineering
• Min 2-3 years technical sales experiences
• Good communication & presentation skill
• Computer literate
• Self motivated, able to work under pressure and achieve sales target
• Fluent in English both oral and written are preferable
• Willing and able to work under pressure
• Having own vehicle are preferable
• Wiling to work in Surabaya

If you are interested in taking up above challenge,

send a detailed resume with a recent photo to :

Jl. Mastrip No. 70

Karang Pilang - Surabaya

Or email to :

dian.susanti@lintech.co.id

Career at PT Saptaindra Sejati

Saptaindra Sejati is a well established and modern mining contractor company providing services for the rapidly growing mining and related industries in Kalimantan and beyond are seeking highly motivate and ambitious individuals that willing to work at remote area to support the company operation expansion program in the following field (Engineering, Production, Plant, and Safety, Health & Environment).

GROUP LEADER ( Kalimantan )
Qualifications:

• Male max. 27 years old
• Bachelor / Diploma degree related to each position.
• 2 years experience as a GL in open Pit coal mining area
• Have a second class blasting certificate for PROD
• Diploma Degree from Hyperkes Institute for SHE
• Base in Kalimantan

SUPERVISOR ( Kalimantan )
Qualifications:

• Male Max. 35 years old
• Bachelor degree related to each position
• 3 years experience as a supervisor in open pit coal mining area
• Have a second class blasting certificate for PROD
• Base in Kalimantan

SECTION HEAD ( Kalimantan )
Qualifications:

• Male Max. 40 years old
• Bachelor degree related to each position
• 5 years experience in open pit coal mining area
• 2 years in managerial position
• Have knowledge about SHE
• Base in Kalimantan

Only short listed candidates will be notify. Attractive remuneration plus generous benefit will be offered to candidates suitable for each position. Please send your application letter togethet with full resume copy of diplomas and recent photograph. Not later than 24 Feb 2008, indicating position code on the left side of the envelope to:

HUMAN RESOURCES DEVELOPMENT DEPARTMENT
PT. SAPTAINDRA SEJATI
MINING CONTRACTOR SERVICES
PO.BOX 4822 / JKTM – JKT 12700, JAKARTA

or
Email to :

recruitment@saptaindra.co.id

Career at Ciba

Ciba is leading global company dedicated to producing high-value effects for its customers products. We invite suitably qualified candidates to join our Water and Paper Treatment team in Indonesia:

Senior Account Manager (Business Line Paper)
This position will manage a team consisting of sales and lab specialists to ensure the achievement of sales related targets and maximum customer satisfaction and retention. He/She will also identify and explore new opportunities to expand customer base.
Requirements:

• Degree in Science or Chemistry or equivalent
• 5 to 10 years experience in paper industry with excellent paper knowledge
• Good commercial, negotiation and influencing skills
• Strong leadership and implementation skills

Account Managers (Business Line Water)
This position is responsible for servicing an existing client base whilst delivering new opportunities.
Requirements:

• Degree in Science, Metallurgy or Engineering
• Minimum 5 years working experience in mining, oil, or related industries
• The position requires frequent travel to remote areas, as such, a high-level of autonomy and self motivation is required
• Critical skills include fleuncy in English, a high-level of computer literacy and mechanical aptitude

Senior Lab Specialist (Business Line Coating)
This position is responsible for providing lab services and support to the sales team. Duties include carry out testing and application, analyze and interpret tests result, provide good technical reports, develop lab techniques and procedures and maintain inventory for the lab.
Requirements:

• Degree in Chemistry
• Minimum 3 years of lab application experience, preferably in coating
• Excellent knowledge of lab test methods and operation of lab apparatus
• Proactive and able to prioritize
• Fluent in English with a high level of computer literacy

Lab Specialists (Business Line Paper)
This position will perform lab activities such as colour matching, conduct lab trial, application and generate report to meet customer requirement. He/She will maintain the lab equipment and assist in providing technical training to customers.
Requirements:

• Diploma or degree in Chemical Engineering
• 2 years lab experience in paper production preferred
• Good knowledge of paper making
• Good analytical and precision skills
• Able to run and assist in mill trials and technical training

Please apply by 27 January 2008 with full resume, stating current and expected salaries and a photograph to:

The Human Resources Department
E-mail : human_resource.service@ciba.com
visit us at www.ciba.com

PT JDA-INDONESIA

PT. JDA-Harsono are manpower consultants for the Oil & Gas, Mining, Manufacturing and Construction industries within Indonesia. JDA had been servicing the Indonesian Oil & Gas, Mining, Manufacturing and Construction industry for 20 years. As a result of the decision to strengthen JDA's presence in Indonesia, JDA-Harsono are now strongly represented in Indonesia with offices in Jakarta, Balikpapan, Tembagapura and Batu Hijau.

Drill & Blasting Section Chief
Qualifications:

• Min D3 Geology / Mine Engineering
• Has 3 years experience in Mining Company
• Has certification of Drill & Blasting
• Has experience to make Drill & Blasting scheduling plan
• Good communication in English (Oral & Written)
• Willing to work on site area

Retail Project Engineer
Qualifications:

• Have a Degree in Civil Engineering
• More than 5 years experience in construction, preferably in medium scale projects
• Safety and Quality experience
• Have strong project management skills
• Experienced with vendor and contractor management
• Preferably with experience handling government liaison work

Product Specialist
Qualifications:

• Expertise in building material industry, preferably roofing industry
• Expertise in consultant and sales
• Focus more on approaching project mediator such as consultant ( Architect, civil ) and contractor ( Applicator )
• Farming oriented – product knowledge intro, no sales oriented
• Background Architect / Civil Engineer
• Minimal 28 years old
• Minimal 3 years experience in the same industry, preferable same role

Technical Engineer
Qualifications:

• Expertise in consultancy more in project supervision
• Expertise in building material industry, preferably roofing industry
• Focus more on monitoring, controlling, supervising, and manager projects ( Installation )
• Background Architect / Civil Engineer
• Minimal 28 years old
• Minimal 3 years experience in the same industry, preferable same role

SITE SUPERVISOR
Accountabilities:

• Ensuring that adequate duty of care is exercised in all aspects of your work activities.
• Personal compliance with the BLY OH&S Regulations and any site specific rules.
• Maintaining drill rigs, drill sites, and associated equipment to a high standard of operational reliability, service, and appearance.
• Supervise and training of Supervisor I and drillers, correct and safe working procedures, the proper care of equipment, mud mixing, site housekeeping and any other activity needed to support the ongoing drilling operation.
• Understanding fully the terms of the drilling program and liaising with Site Manager to ensure successful completion.
• Consistently applying sound drilling practices and techniques to the best of your ability. Consult with Site Manager if conditions become abnormal, or conditions encountered are outside your ability.
• Attendance, punctuality, general attire of all personnel must be enforced.
• Your personal presentation, behaviour and conduct meet or exceed company requirements

Key Functions:

• Ensure Pre-start checks and Safety Inspections are completed.
• Ensure Servicing and maintenance of drill rig and auxiliary equipment.
• Supervise daily rig operations.
• Supervise Core/sample recovery techniques.
• Housekeeping.
• Effective communication.
• Inventory control.
• Report writing.
• Training

Pre-start Checks and Safety Checks :

• Ensure all pre start checks are performed diligently, timely, correctly recorded and reported.
• Ensure any outstanding issues from check lists are actioned on.
• If unsafe condition is encountered ensure that this is rectified BEFORE work continues.
• Ensure Tool Box meetings every held every shift, every rig.
• Complete one BBS every week.

Servicing and Maintenance:

• Ensure servicing is performed as per site requirements.
• Maintain all machinery in good, clean working condition. If faults are detected you must repair or report to Head Mechanic immediately.
• Schedule planed maintenance.
• Ensure that all safety shut down system are kept in good working order. If faulty, this must be reported immediately to Head Mechanic BEFORE work can continue.

Operations:

• Ensure rigs are up in a safe manner, so as to obtain an accurate sample as specified by Client.
• Ensure rigs are operated in a manner so as not to endanger yourself or any other persons involved in the day to day running of the operation.
• Ensure rigs operate rig in a manner that conforms to Boart Longyear’s performance targets, policies and procedures.
• Have a clear and effective plan prior to rig moves.
• Attend and participate in client site operational meetings.
• Organise your own time, prioritize your tasks.

Core / Sample Recovery:

• Safely and cost efficiently provide Client with core/sample.
• Ensure core/sample meets Client specifications.
• Stop drilling when core/sample falls short of clients specifications. (recovery. Hole direction.)
• Ensure hole specifications i.e. angle depth size, meet Client’s requirements.
• Ensure core/sample are presented in a manner acceptable to Client.

Housekeeping:

• Ensure all drill site, work areas and access are clean and in a hazard free state.
• Ensure all equipment are maintained in a hazard free state.
• Ensure vehicles are maintained in a clean, hazard free state.
• Maintain camp and living quarters in a clean, hygienic condition.

Effective Communications:

• Communicate all relevant information to your team member’s promptly.
• Communicate with crew to ensure tasks are completed safely and in a time and cost efficient manner.
• Communicate regularly with Site Manager and Client to establish requirements/tasks are completed and that the job runs safely, smoothly and without unnecessary delays.
• Liaise with geologist in charge of drill program, but have no authority to alter it.
• Privacy policy of the client must be understood by all BLY personnel and adhered to.
• Privacy policy of BLY needs to be understood and adhered to.
• Liaison between the client on all matters must be agreed upon with the site manager. This must be discussed and an understanding reached on what information the drill crew delivers to the client and what is to go through site manager.
• Contribute as a valued team member and demonstrate commitment to common goals and targets of the Company.
• Inform the Site Manager and HR on all disciplinary interactions.

Drilling Coordinator
Qualifications:

• Min S1 in Petroleum Engineering
• Has 3 years experience in Oil Company / Oil Services
• Has certification of Drill & Blasting
• Has experience to make Drill & Blasting scheduling plan
• Has experience in Onshore / Offshore facilities
• Good communication in English (Oral & Written)
• Willing to work on site area

Complete resume in English together with contact details (name, company & positions) of two Referees should be addressed to: info@jda-indonesia.co.id (MS. Word format, not exceeding 200kb), attn: Sangkala Wondal (Drill & Blasting Section Chief, Retail Project Engineer, Drilling Coordinator ) , attn: Sunardi (Site Supervisor), attn: Erwina Yustika (Technical Engineer, Product Specialist) not later than 21 January 2008 quoting the position applied in the subject of email. Please apply only if you possess the requirements.

ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED.

PT Aneka Tambang, Tbk

PT Antam Tbk, internationally-listed, leading Indonesian diversified mining and metals state owned company has an excellent opportunity for highly motivated, qualified and dedicated individuals to join Antam’s solid operations in Indonesia for the following positions:

Geological Engineer (Senior and Junior Staff)
Requirements:

• Bachelor degree in Geological Engineer
• Min. has 2-7 years experience and fresh graduated are welcome

Please send your application (curriculum vitae & photograph) no later than
January 31st, 2007 to:

PT. ANTAM, Tbk
Gedung Aneka Tambang
Jl. Letjend T.B Simatupang No.1
Lingkar Selatan, Tanjung Barat
Jakarta 12330

Coal Mining (Pertambangan Batubara)

A fast growing coal mining company offers you challenging post as:

1. Community Relations Manager (CRM)
   
   • S1 degree in Social Science or any discipline
   • 5 years experience in related field, preferably at the coal/mining company
   • Good relationship with Community, Government Institution and Non Government Organization
   • Good in managerial skills
   • Able to work with people from various levels of communities
   • Willing to work and live at remote area
2. Human Resources Manager (HRM)
   
   • S1 degree in Law, Management, Psychology, or related
   • 10 years experience in handling HR Department (training, industrial relations, recruitment, administration)
   • Having good knowledge and ability to manage and administer in organization
   • Having good knowledge of expatriate formalities and manpower regulation
3. Community Development Officer (CDO)
   
   • S1 degree in Social Science or any discipline
   • 3 years experience as CDO, preferably at the coal/mining company
   • Good relationship with Community, Government Institution and Non Government Organization
   • Posses good concepts on Community Development, Community Empowerment and Local Business Development Program
   • Good administrative skills
   • Able to work with people from various levels of communities
   • Willing to work and live at remote area
4. Mine Planning Superintendent (MPSPDT)
   
   • S1 Degree in Mine Engineering
   • 7 years experience in long term mine plan
   • Familiar with mining software (Minescape, Vulcan, Surpac, Minex)
5. Geotechnical Engineer (GTE)
   
   • S1 degree in Geotechnical background
   • 6 years experience in open pit coal mining
   • Having experiences in coal mining feasibility study project
   • Familiar to use Medsystem and Minesight or Mincom, GeoSlope/W, and Autocad
   • Having knowledge in rock/soil mechanics, coal modelling and groundwater modelling
6. Shift Engineer (SE)
   
   • S1 degree in Mine Engineering
   • 5 years experience in coal mining operation
   • Having knowledge of Mincom program
   • Familiar to use MineScape or Mine Sight and AutoCAD
7. Drill and Blasting Section Chief (DBSC)
   
   • S1 degree in Mine Engineering
   • 6 years experience in drilling and blasting field
   • Having knowledge of drilling and blasting technique and explosive rule
   • Having experience in operating te drilling equipment
   • Familiar to use Microsoft Office, AutoCAD
8. Blending Section Chief (BSC)
   
   • S1 degree in Mine Engineering
   • 3~5 years experience in mine operations
   • Certified in AMDAL A
   • Good knowledge on Environment Management System
   • Good understanding of ISO 1400:1996 is preferable
   • Having "SIM A" (Driving License)
9. Mining Engineer (ME)
   
   • S1 degree in Mine Engineering
   • 0~3 years experience in Mine Planning
   • Experience in long term mine planning, mine engineering support and mining engineering project study/evaluation is perefable
     
10. Geologist (GEO)
    
    • S1 degree in Geology Engineering
    • 0~3 years experience as geologyst
    • Experience in long term geological modelling, geological technical services, and operation supports is preferable
11. Coal Hauling Supervisor (CHSPV)
    
    • S1 degree in Mine or Civil Engineering
    • 1~2 years experience in mining operation
12. Mechanical Engineer Supervisor (MES)
    
    • S1 degree in Mechanical Engineering
    • 1~2 years experience in handling mine/port facilities maintenance, modifying the machines, controlling the maintenance budget
13. Contractor Management Supervisor (CMS)
    
    • S1 degree in Mechanical Engineering
    • 0~3 years experience in mine operations
14. Washing Plant Supervisor (WPS)
    
    • S1 degree in Mine Engineering
    • Fresh graduate welcome to apply
15. Shiploading Operation Supervisor (SOS)
    
    • S1 degree in Mechanical, Electrical Engineering and Marine
    • 1~2 years experience in shipping operation at Coal Mining company is preferable
16. Administration Mine Manager (AMM)
    
    • S1 degree in Management
    • 10 years experience in handling HR, Finance, Accounting, General Services, External Relations, and QSE
    • Having good understanding of Manpower Law and Regulation
    • Having capability in Negotiation
17. General Services Manager (GSM)
    
    • S1 degree in Management
    • 7 years experience in handling Warehouse, Purchasing, General Affairs, and Company Assets
    • A strong management and leadership personality

General Qualifications:

1. All positions based in Kalimantan
2. Good communication in both written and spoken English
3. Good interpersonal and organizational skills
4. Highly self motivated and strong analytical skills
5. Computer literate (MS Office)
6. Creative, self starter, team player and having self integrity

Please send your application with comprehensive CV, a recent photograph, copy of certificate and academic transcript no later than 5 January 2008 and kindly mark code of the position applied at email subjected to:
Human Resource Manager
recruitment.coal@gmail.co.id